– Our Markets –

As a sustainable company, we are committed to provide you with the most reliable, long-term energy efficient solution available.

We don’t just sell products – we provide solutions.

Municipal

Incorporating both mixing and aeration into one subsurface turbine aerator, our products can be successfully utilized in lagoons, tanks, flow equalization basins, water storage reservoirs, and many other applications.

Industrial

With excellent oxygen transfer efficiency and low power consumption alongside a robust design that can withstand the abrasive treatment environment, our products are the perfect solution for industrial wastewater applications.

Aquaculture

Our products can aerate, oxidize and ozone water in order to increase the growing of the fishes. We can keep oxygen level in the water at decided level in order to make the fish grow faster and taste better.

TT200
Image is not available
TORING TURBINE
®
DESCRIPTION
Toring Turbine® Aerator TT200 can transfer up to 4.7 kilograms of
dissolved oxygen per kilowatt hour. In some cases TT200 led to
reduction in power consumption by almost 60%.
Ø24
COUPLING SIZE & MATERIAL
BRASS
ALUMINIUM
Ø24
SHAFT LENGTH (cm)
80
100
120
150
There is also a possibility of custom-made shaft lenghts.
RECOMMENDED FOR MOTORS
2.2kW
3kW
4kW
Soft starter for motor controlling is highly recommended.
Ø28
BRASS
ALUMINIUM
Ø28
1.5kW
SUCTION SYSTEM SS-130
Image is not available
TORING TURBINE
®
DESCRIPTION
Toring Turbine® Suction System is used as a gas intake point, allowing
gas to enter the system only through connection pipe. This allows users
to choose the type of gas they want to use or to use gas/air intake point
outside of the installation point.
Ø24
COUPLING SIZE & MATERIAL
BRASS
ALUMINIUM
Ø24
SHAFT LENGTH (cm)
80
100
120
150
There is also a possibility of custom-made shaft lenghts.
RECOMMENDED FOR MOTORS
2.2kW
3kW
4kW
Soft starter for motor controlling is highly recommended.
Ø28
BRASS
ALUMINIUM
Ø28
1.5kW
FLOATER 2 (FAB)
Image is not available
TORING TURBINE
®
DESCRIPTION
Toring Turbine® Floater 2 (FAB) is made of 316L stainless steel and specially designed vinyl valve system buoys. Designed for demanding industrial applications where stable measurements and extensive customization are essential.
Ø28
COUPLING SIZE & MATERIAL
BRASS
ALUMINIUM
Ø28
SHAFT LENGTH (cm)
80
100
120
150
There is also a possibility of custom-made shaft lenghts.
RECOMMENDED FOR MOTORS
2.2kW
3kW
4kW
Soft starter for motor controlling is highly recommended.
FLOATER 3 (FAPE)
Image is not available
TORING TURBINE
®
DESCRIPTION
Toring Turbine® Floater 3 (FAPE) is made of long lasting polyethylene
with UV protection. Designed to provide stable, reliable performance
in demanding operating environments.
Ø28
COUPLING SIZE & MATERIAL
BRASS
ALUMINIUM
Ø28
SHAFT LENGTH (cm)
80
100
120
150
There is also a possibility of custom-made shaft lenghts.
RECOMMENDED FOR MOTORS
2.2kW
3kW
4kW
Soft starter for motor controlling is highly recommended.
SWITCHING CONSOLE (SC)
Image is not available
TORING TURBINE
®
DESCRIPTION
Toring Turbine® Switching Console (SC) is perfect solution for shore-fixed aeration. Innovative design allows easy installation and control of turbine aerator. Switching Console (SC) is adapted for a wide range of drive options.
Ø24
COUPLING SIZE & MATERIAL
BRASS
ALUMINIUM
Ø24
SHAFT LENGTH (cm)
80
100
120
150
There is also a possibility of custom-made shaft lenghts.
RECOMMENDED FOR MOTORS
2.2kW
3kW
4kW
Soft starter for motor controlling is highly recommended.
Ø28
BRASS
ALUMINIUM
Ø28
1.5kW
FIXED MOTOR CONSOLE WITH
BOTTOM BEARING ARM (FMC and BBA)
Image is not available
TORING TURBINE
®
DESCRIPTION
Toring Turbine® Fixed Motor Console with Bottom Bearing Arm
(FMC and BBA) is completely made of 316L stainless steel, and as such
is suited for demanding operating environments.
Ø28
COUPLING SIZE & MATERIAL
BRASS
ALUMINIUM
Ø28
SHAFT LENGTH (cm)
80
100
120
150
There is also a possibility of custom-made shaft lenghts.
RECOMMENDED FOR MOTORS
2.2kW
3kW
4kW
Soft starter for motor controlling is highly recommended.
O3 SYSTEM (TT200-03)
Image is not available
TORING TURBINE
®
DESCRIPTION
Toring Turbine® O3 SYSTEM (TT200-03) is used to bring different gases under high pressure into the water, primary for highly oxidative gases such as ozone and oxygen. The product is under development.
Ø28
COUPLING SIZE & MATERIAL
BRASS
ALUMINIUM
Ø28
SHAFT LENGTH (cm)
80
100
120
There is also a possibility of custom-made shaft lenghts.
RECOMMENDED FOR MOTORS
3kW
4kW
Soft starter for motor controlling is highly recommended.
2.2kW
previous arrow
next arrow
ArrowArrow
TT200®
SS130®
FAB®
FAPE®
SC®
FMC® and BBA®
O3 SYSTEM®
Slider
TT200®


Description
Toring Turbine® Aerator TT200 can transfer up to 4.7 kilograms of dissolved oxygen per kilowatt hour. In some cases TT200 led to reduction in power consumption by almost 60%.

 

Make an inquiry >

 

SS130®

 

Description
Toring Turbine® Suction System is used as a gas intake point, allowing gas to enter the system only through connection pipe. This allows users to choose the type of gas they want to use or to use gas/air intake point outside of the installation point.

Make an inquiry >

FAB®

 

Description
Toring Turbine® Floater 2 (FAB) is made of 316L stainless steel and specially designed vinyl valve system buoys. Designed for demanding industrial applications where stable measurements and extensive customization are essential.

Make an inquiry >

FAPE®

 

Description
Toring Turbine® Floater 3 (FAPE) is made of long lasting polyethylene with UV protection. Designed to provide stable, reliable performance in demanding operating environments.

Make an inquiry >

SC®

 

Description
Toring Turbine® Switching Console (SC) is perfect solution for shore-fixed aeration. Innovative design allows easy installation and control of turbine aerator. Switching Console (SC) is adapted for a wide range of drive options.

Make an inquiry >

FMC® AND BBA®

 

Description
Toring Turbine® Fixed Motor Console with Bottom Bearing Arm (FMC and BBA) is completely made of 316L stainless steel, and as such is suited for demanding operating environments.

Make an inquiry >

O3 SYSTEM®


Description
Toring Turbine® O3 SYSTEM (TT200-03) is used to bring different gases under high pressure into the water, primary for highly oxidative gases such as ozone and oxygen. The product is under development.

 

Make an inquiry >

 

– Toring Turbine ENGINEERING –

Our excellent knowledge of aeration combined with the experience gained in providing various different projects gives us the unquestionable skills to design an aeration system to fit every customer’s process need. All previous experience makes us a reliable supplier with complete focus on our customer.

We offer a comprehensive, fully-integrated portfolio of services that keeps your business running at its best.

Design & Consultancy

In order to gain a thorough understanding of your requirements please contact our expert engineers.

Maintenance & Repair

Use our cost-effective support to enhance operational reliability and to get in-depth maintenance analysis.

Parts & Refurbishments

Stay comfort with knowing the equipment and spare parts you need are always available.

Training & Technical Support

Our engineers will provide the training and technical support so that your business runs smoothly.

© 2018 Toring Turbine d.o.o. – All Rights Reserved.
Izdelava spletnih strani: Agencija Kodnes